Sichuan Western Flag Drying Equipment Co., Ltd

DL-3 type lower in and upper outlet electric hot blast stove is composed of eight parts: electric heater + incubator + fan + fresh air valve + waste heat recovery device + humidity exhaust fan + control system, which is specially designed for supporting the descending drying room or warming room and place heating, after the electric heater converts the electric energy into heat energy, it is output to the drying room and the warm room by the upper air outlet under the action of the fan by the return air or fresh wind, and is input by the lower return air outlet, reheating, and has been circulating, when the humidity in the circulating air reaches the emission standard, the humidity exhaust fan and the fresh air valve are started at the same timeThe moisture and fresh air are fully exchanged in the waste heat recovery device, the moisture is discharged, and the waste heat of the fresh air enters the circulation system.
Benefits/Features:
1. Compact structure and easy installation;
2. The air volume is huge, and the wind temperature fluctuation is small;
3. Stainless steel finned tube, durable;
4. Fully automatic control system, group start, closed, small load, accurate temperature control;
5. High-density fireproof rock wool box to avoid heat loss;
6. High temperature and high humidity resistant fan, protection grade IP54 and insulation grade H
7. The dehumidification system is integrated, and the heat loss is very small through waste heat recovery.